New type Roll Crushing Grinder

1. Good quality but favorable price 2. High efficiency 3. Good reputation 4. easy to operate and to maintenance

Product Introduction:

1. This series of roll crusher mainly consist of roller,the roller back-up bearing,compaction and adjusting device and actuating device.

2. The grain-size is adjustable. Between two rollers equipped with wedge or gasket adjusting device, wedge adjusting device upper have adjustment bolts, when adjustment bolts pull wedge block up, wedge block will move roller from fixed wheel, namely the clearance between two rollers enlarge, then the grain-size enlarge. When wedge block downward, the grain-size decrescent. Gasket device through increase or decrease the number or thickness of gasket to adjust grain-size, when added gaskets that two roller clearance enlarge, the grain-size enlarge. While decreased gaskets that two roller clearance decrescent, the grain-size decrescent.

3. Actuating device is driven by two motors, pass the triangle belt drive to geneva wheel then drag the roller, according to the relative direction rotating. In crushing material, material pass feed port through roller, rolling and broken, the broken finished product discharged from chassis below.

Double-roll Crusher parameters:

 

Model	Feeding size(mm)	Output size(mm)	Output capacity(t/h)	Motor power(kw)	Weight (t)	Overall dimension (mm)
2PG400×250	<35	≤2-8	2-10	2×5.5	1.3	2110×870×810
2PG610×400	<65	≤2-20	5-20	2×15	3.9	3510×1420×1030
2PG750×500	<75	≤2-25	10-40	2×18.5	9.5	4210×1630×1260
2PG800×600	<80	≤2-25	12-45	2×22	10.8	4505×1780×1320
2PG1000×700	<100	≤3-30	20-65	2×30	14.9	5310×2175×1595
2PG1200×800	<120	≤3-35	35-80	2×37	25.5	6290×2270×1870
2PG1500×800	<130	≤3-45	50-120	2×75	33.7	7460×2410×2290
2PG1600×1000	<150	≤3-50	60-140	2×90	41.2	8220×2680×2475

 

New type Roll Crushing Grinder